Use the M2030 Facility Overview page to check the completion status of your facility. This guide helps you identify the status of milestones such as selecting customers, adding measurements, and building a reduction plan, allowing users to fully meet their customer requests.
M2030 Facility Overview page
The page highlights three key areas that must be updated annually:
- Select Customers
- Add Measurements
- Build Reduction Plan
For each section, you'll see a status indicator: Not Started, In Progress, or Completed. This guide will help you confirm if you've done everything required or if any data is missing.
How to Check If Your Submission is Complete
Visit your M2030 Facility Overview page. Check the status of each section:
1. Select Customers
You must make sure that all customers the facility supplied have been selected in the previous reporting year.
Not started: No customers have been selected for the previous reporting year.
Completed: A single customer has been added to the Measurements page for the previous reporting year.
IMPORTANT: Make sure you have added all customers that your facility supplies so your customers can track your progress from their own M2030 Platform
2. Add Measurements
Each year, you should enter your measurements for the previous 12-month period to keep your customers and your internal reports updated.
Not Started: No measurements have been entered for the previous reporting year.
In Progress: Measurements have been saved for the previous reporting year but have not been submitted.
Completed: All measurements have been submitted for the previous reporting year.
💡 Why is the tick greyed out after I have completed my entry?
If you can’t check the box to mark your submission as complete, it means some data is missing. Look for any red asterisks (*) to find what's missing.
TIP: One common mistake is forgetting to add energy data. Check if your energy section is incomplete. For help on adding metrics, see our guide HERE.
3. Build Reduction Plan
The Reduction Plan tool is specifically designed to support your decarbonization journey. Through enabling project management and seamless reporting, it demonstrates to both internal and external stakeholders your commitment to meeting reduction targets. Not Started: No actions have been started yet. Shortlisted actions also fall under this category, as no progress has been made on them.
In Progress: Actions may have been added to your Reduction plan, but do not meet the 'Completed' criteria.
Completed:
- There is at least one Action Adoption under ‘In Progress’ status with estimated annual energy savings (or Scope 1 CO2e savings/Scope 2 CO2e savings) and a target date.
- There is at least one Action ‘Completed’ status with annual energy savings (or Scope 1 CO2e savings/Scope 2 CO2e savings) and a target date in the current reporting period.
AI Recommended Actions
Our AI-powered system provides Recommended Actions to help you build your Reduction Plan and achieve your goals efficiently. The top three actions are listed and will be updated until no more recommendations are available.
Scope 1 & 2 Reduction Pathway by Year
The Scope 1 & 2 Reduction Pathway visualizes your progress in reducing emissions. This feature helps you track your reductions over time and plan future actions.
FAQs
-
Your submission is complete if all three sections (Select Customers, Add Measurements, Build Reduction Plan) show as "Completed" on the Facility Overview page.
-
If any of the sections on your Facility Overview page are marked as Not Started or In Progress, then data is missing. You need to provide more information to complete that section. Follow the guidance above to see what’s required.